The next thing I wanted to do to the IZZE bottles was glitter them. You can check out how I drilled the holes in the back of the bottles here. I used Goo Gone to take off the sticky residue that was left over from the label. It also removes stamps that are on the bottles.

Then I taped off the area I wanted to glitter. I taped it off where the neck of the bottle starts to get skinnier.

I brushed mod podge on the bottom part of the bottle then sprinkled on the glitter.

I left them dry a few minutes.

Then carefully peeled the blue tape off. I love the 2 tone look. I think it will show the glow of the lights better too.

So how do you like the glittered bottles? I think they’re pretty gorgeous!

Have a Wonderful Wintery Weekend!

I’m linking to these awesome blog parties:
Weekend Wrap Up Party at Tatertots and Jello
Show and Tell Saturday at Be Different Act Normal
Sunday Showcase Party at Under the Table and Dreaming
Trash to Treasure at Sassy Sites
Best DIY Projects of December Linky Party at Beneath My Heart
Before and After Party at Thrifty Decor Chick

Be Sociable, Share!
  • Twitter
  • Facebook
  • email

{ 45 comments… read them below or add one }

Kristina December 9, 2011 at 7:27 pm

What a great idea! I’m loving glittery decor this Christmas!

Rhonda G December 9, 2011 at 8:21 pm

Fantastic idea. These are just so creative and I want to tell you that I love your blog for idea’s like this. Thanks so much for sharing.

Susan December 9, 2011 at 9:13 pm

It looks great so far, I can’t wait to see the finished product!

Shannon at madiganmade December 11, 2011 at 8:30 pm

Aaahh. Mod podge and glitter… a combo that never fails! ;)
They look beautiful so far!

Cinthya December 11, 2011 at 9:58 pm

Wow. That these looks so cool. I would love if you linked to http://www.eyeheart.ca/2011/12/anything-goes-at-eye-heart-5.html

Sushimon December 12, 2011 at 12:25 am

A wonderful and wonderfully frugal Xmas decoration!

Diane@InMyOwnStyle December 21, 2011 at 10:53 am

Oh MY! I love these… so sparkly, pretty, and do-able. All lined up they make such a festive impact.

Tracy | Screaming Sardine December 21, 2011 at 12:17 pm

Wow, these are so pretty. I bet they’re absolutely gorgeous with the lights inside!

Pinning on pinterest. ;)

Cheers,
Tracy

JJ December 26, 2011 at 11:55 pm

These just look so great! I love the sparkle you used. I may have to do some of these for winter decor now that Christmas is coming down.

Rhonda G. J. December 27, 2011 at 9:13 am

Thank you so much for sharing your creative idea! I love it!!

Jae December 29, 2011 at 5:44 pm

the glitter bottles are a neat idea!

Lorrie January 1, 2012 at 11:25 am

Your bottles are beautiful! What a wonderful idea! I’m now a follower!

Kelli@ahappyplacecalledhome.com January 2, 2012 at 11:23 am

Looks like everyone is saying it, but such a great idea! These are so cute!

Shannon January 3, 2012 at 4:00 pm

LOVE!! Thinking they will be a great center piece idea for our wedding!! Getting the lights with batteries instead of a plug!! Thanks for sharing!

Anna January 4, 2012 at 1:56 pm

question for you – did you put a layer of something on top of the glitter so that the glitter couldn’t be rubbed off?

Veronnica W. January 7, 2012 at 10:38 am

What a great idea! I’ve been saving my glass jars for over a year now and I’ve been trying to figure out what to do with them and I think I finally found out! Thanks so much for the inspiration! Happy New Year!

becky hoffman January 8, 2012 at 12:57 pm

What did you use for the snow man bottle?

Melissa January 19, 2012 at 2:55 pm

SO PRETTY! Love this!! : )

Lorrie Everitt February 5, 2012 at 3:20 pm

These are amazing! I’ve pinned these to my wedding inspiration boards!!

Push "It" Pallet February 9, 2012 at 1:34 am

Absolutely gorgeous! I wish I had seen these during the holidays…very creative and very pretty! TWO thumbs up. : ) I just found your page, and I am now a fan!!

Cindy April 3, 2012 at 2:15 pm

This would be great to do on little candle holders. I would probably use a different glue, though and spray with fixative to make sure it doesn’t “shed”. Just imagine the sparkle from the inside. You could even use the little battery candles if you didn’t want a real flame in your craft!

Elissia May 18, 2012 at 7:43 pm

How did you get the glitter to stick to the bottles?? And how do you keep the glitter on?? Please let me know i sooo want to do this thank you!

chrissie kruger June 12, 2012 at 11:15 am

How did you get the candles inside the bottle

Elicia June 12, 2012 at 9:42 pm

I saw something on Pinterest that taught how to cut off the tops of glass bottles to make glasses, etc. I think it was here- http://www.recyclart.org/2012/02/diy-easy-cut-glass-bottles/
Then you could make candle holders from them! Also, I bet if you spray the bottles with some kind of clear coat it would really help keep them from shedding glitter too!

Tamika June 13, 2012 at 8:14 am

How beautiful! What a great idea. Thanks for sharing!

angi June 19, 2012 at 1:24 pm

Did anyone else actually do this? I am planning on doing this tomorrow night and was wondering if anyone had any helpful tips & how they turned out… Thanks!

kelliblue July 15, 2012 at 9:57 am

Hi – found you via Karen’s blog and Pinterest. These are gorgeous…I have some cobalt blue beer bottles (Michelob Platinum I think) that will look stunning with glitter on them! But I was thinking: what about, instead of drilling holes, you dropped a couple of these inside each bottle? http://otherthings.com/blog/images/led_throwies_small.jpg

Becca August 3, 2012 at 10:08 pm

I did another variation of this decoration. I used a jar and hot glue. I put swirley looking designs on the jar then glitter on the hot glue while it was still hot and Tada! Beautiful centerpieces. But don’t forget to Spray them with aerosol hair spray so the glitter won’t come off! Simply Beautiful!

Aly August 10, 2012 at 7:49 pm

You didn’t really describe it well enough for me to understand. How did you get the glitter to stick? What kinds of lights did you put in them??

Rona Ngapera August 16, 2012 at 11:25 pm

Such an Awesome idea , I just wanted to know what is mod podge ? is it a special kind of glue?

Connie September 3, 2012 at 9:41 pm

To Rona:
Mod Podge is a waterbase sealer, glue and finish all in one jar! You can use it on many different crafts, including glueing and sealing puzzles together so that you can mount them on a board or in a frame, decoupaging pictures on wood, and for use on any surface.

Wendy Boggs September 3, 2012 at 10:35 pm

Rona — it is a glue that you can get from walmart (or craft stores) It’s literally called Mod Podge. It’s normally used to glue puzzles together..

This is a GREAT idea.. I’m going to use it for my fall themed wedding (with different colors of glitter)

Karen Symons September 10, 2012 at 9:51 pm

You can use Epsom salt instead of glitter if you don’t like the idea of glitter everywhere. Beautiful on candles too.

Lisa September 24, 2012 at 8:57 pm

Starting out from scratch after my last divorce; this is a wonderful way to recycle and create a themed Christmas without the intense price!

Kelly September 28, 2012 at 4:20 pm

What type of lights did you use? Thanks!

leanneja September 28, 2012 at 4:29 pm

I use battery powered Christmas lights.

Witteney October 2, 2012 at 9:16 pm

I use “craft” mini lights you can order them online – there is only a plug on one end instead of two ends. I drill a hole in the bottle (I have a diamond tipped 1/2″ drill bit and my husband’s drill), then feed the lights into the hole, leave the plug hanging out, and there you have it! This will be something different and neat for the holidays.

Lesley February 24, 2013 at 10:48 am

Hi I was just wondering does the glitter wash off as want to decorate some drinking glasses this way but want people to be able to use again? Please thank you x

leanneja February 24, 2013 at 11:39 am

I spayed a clear coat over the top of the glitter but I still wouldn’t trust it to not wash off. I don’t wash these bottles, I just give them a light dusting. I probably wouldn’t use the glitter on drinking glasses.

Skye November 3, 2013 at 11:41 am

I was wondering what type of mod podge you used. I was going to buy some when I saw that there are different types like glossy, matte, etc. What kind works best for this project?

Nancy December 13, 2013 at 9:11 am

Ideas for the lights?

leanneja December 15, 2013 at 10:32 pm

The lights are a strand of 20 Christmas lights. There is a link on how to drill the holes for the lights in the post.

Prabh March 19, 2014 at 8:53 am

What type of glitter did you use? Which brand?

GlitteryBittery May 3, 2014 at 11:11 am

Hi there, gorgeous bottles. I have tried these a few times with Mod Podge and a small, medium and large brush. How do you get your Mod Podge so even? I have streaks which show up in the light? Thanks!

Elisa December 16, 2014 at 7:46 pm

Did you use any special type of glitter, like extra fine? Also, did you go heavy with the Mod Podge?
Thanks. :)

Leave a Comment

CommentLuv badge

WP-SpamFree by Pole Position Marketing

{ 4 trackbacks }

Previous post:

Next post: